Zero-Drift, Single-Supply, RRIO Quad Op Amp Features: Low offset voltage: 1 μV Input offset drift: 0.005 μV/°C Rail-to-rail input and output swing 5 V/2.7 V single-supply operation High gain: 145 dB typical CMRR: 140 dB typical PSRR: 130 dB typical See data sheet for additional featuresAD8574-EP supports defense and aerospace applications (AQEC standard) Download AD8574-EP Data Sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/12634 DSCC Drawing Number

Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = , 2 Features: Wide input range beyond supplies Rugged input overvoltage protection Low supply current: 200 μA maximum (per amplifier) Low power dissipation: 0.5 mW at VS = 2.5 V Bandwidth: 1 MHz (G = ½) CMRR: 80 dB minimum, dc to 20 kHz (G = ½, B Grade) Low offset voltage drift: ±1 μV/°C maximum (B Grade) Low gain drift: 1 ppm/°C maximum (B Grade) Enhanced slew rate: 1.4 V/μs Wide power supply range Single supply: 2 V to 36 V Dual supplies: ±2 V to ±18 V 8-lead SOIC, 14-lead SOIC, and MSOP packages

Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = , 2 Features: Wide input range beyond supplies Rugged input overvoltage protection Low supply current: 200 μA maximum (per amplifier) Low power dissipation: 0.5 mW at VS = 2.5 V Bandwidth: 1 MHz (G = ½) CMRR: 80 dB minimum, dc to 20 kHz (G = ½, B Grade) Low offset voltage drift: ±1 μV/°C maximum (B Grade) Low gain drift: 1 ppm/°C maximum (B Grade) Enhanced slew rate: 1.4 V/μs Wide power supply range Single supply: 2 V to 36 V Dual supplies: ±2 V to ±18 V 8-lead SOIC, 14-lead SOIC, and MSOP packages

Low Power, Rail-to-Rail Output, Video Op Amps with Ultralow Power

36 V Precision, 2.8 nV/√Hz Rail-to-Rail Output Op Amp

Precision RRIO Dual Op Amp Features: Single-supply operation  Wide bandwidth: 4 MHz  Low offset voltage: 65 μV  Unity-gain stable  High slew rate: 4.0 V/μs  Low noise: 3.9 nV/√HzOP284-EP supports defense and aerospace applications (AQEC standard) Download OP284-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Enhanced product change notification Qualification data available on request V62/14624 DSCC Drawing Number

Digitally Programmable Sensor Signal Amplifier Features: Very low offset voltage: 12 μV maximum over temperature  Very low input offset voltage drift:  65 nV/°C maximum High CMRR: 96 dB minimum  Digitally programmable gain and output offset voltage  Gain range from 28 to 1300  Single-wire serial interface  Stable with any capacitive load  SOIC and LFCSP packages  2.7 V to 5.5 V operation  Qualified for automotive applications

The ADCMP603 is a very fast comparator fabricated on XFCB2, an Analog Devices, Inc., proprietary process. This comparator is exceptionally versatile and easy to use. Features include an input range from VEE ? 0.5 V to VCC + 0.2 V, low noise complementary TTL-/CMOS-compatible output drivers, and latch inputs with adjustable hysteresis and/or a shutdown input.The device offers 3.5 ns propagation delay with 10 mV overdrive on 4 mA typical supply current.A flexible power supply scheme allows the device to operate with a single +2.5 V positive supply and a ?0.5 V to +2.8 V input signal range up to a +5.5 V positive supply with a ?0.5 V to +5.8 V input signal range. Split input/output supplies with no sequencing restrictions support a wide input signal range while still allowing independent output swing control and power savings.The device passes 4.5 kV HBM ESD testing and the absolute maximum ratings include current limits for all pins.The complementary TTL-/CMOS-compatible output stage is designed to drive up to 5 pF with full timing specs and to degrade in a graceful and linear fashion as additional capacitance is added. The comparator input stage offers robust protection against large input overdrive, and the outputs do not phase reverse when the valid input signal range is exceeded. High speed latch and programmable hysteresis features are also provided with a unique single-pin control option.The ADCMP603 is available in a 12-lead LSCFP.Applications High speed instrumentation Clock and data signal restoration Logic level shifting or translation Pulse spectroscopy High speed line receivers Threshold detection Peak and zero-crossing detectors High speed trigger circuitry Pulse-width modulators Current-/voltage-controlled oscillators Automatic test equipment (ATE)

The ADL5246 is a high performance, low noise variable gain amplifier (VGA) optimized for multistandard base station receivers and point to point receive (Rx) and transmit (Tx) applications. The low noise figure and excellent linearity performance allow the device to be used in a variety of applications.The device consists of a low noise amplifier, a high linearity VGA, and a ? W output driver stage. The variable attenuator networks are optimized to provide high linearity performance over the 45 dB gain control range. Gain is set using a unipolar control voltage from 0 V to 3.3 V. The output stage of the ADL5246 is an externally tuned ? W driver amplifier, which allows the device to be optimized anywhere between the 0.6 GHzto 3 GHz range, with an average tuning bandwidth of 200 MHz wide. An external filter can be used between the VGA and the final driver amplifier. The ADL5246 can be biased between 3.3 V and 5 V to tradeoff between performance and power consumption.The ADL5246 is fabricated on an advanced GaAs process. The device is available in a 32-lead, RoHS-compliant, 5 mm ? 5 mm LFCSP and thermally rated to operate over the ?40?C to +105?C temperature range.APPLICATIONS Multistandard radio receivers Point to point Rx and Tx Instrumentation Military and aerospace

The LTC6419 is a dual very high speed, low distortion, differential amplifier. Its input common mode range includes ground, so that a ground-referenced single-ended or differential input signal can be DC-coupled, level-shifted, and converted to drive an ADC differentially.The gain and feedback resistors are external, so that the exact gain and frequency response can be tailored to each application. For example, the amplifier could be externally compensated in a no-overshoot configuration, which is desired in certain time-domain applications.The LTC6419 is stable in a differential gain of 1. This allows for low output noise in applications where gain is not desired. Each amplifier draws 52mA of supply current and has an independent shutdown pin which reduces current consumption to 100?A per amplifier.The LTC6419 is available in a compact 4mm ? 3mm?20?pin LQFN package and operates over a ?40?C to 125?C?temperature range.Applications Broadband I/Q Amplifiers Dual Differential ADC Driver High-Speed Data-Acquisition Cards Automated Test Equipment Time Domain Reflectometry Communications Receivers