The AD823A is a dual precision, 17 MHz, JFET input op amp manufactured in the extra fast complementary bipolar (XFCB) process. The AD823A can operate from a single supply of 3 V to 36 V or from dual supplies of ±1.5 V to ±18 V. It has true single-supply capability with an input voltage range extending below ground in single-supply mode. Output voltage swing extends to within 20 mV of each rail for IOUT ≤ 100 μA, providing outstanding output dynamic range. It also has a linear output current of 40 mA, 0.5 V from the supply rails.An offset voltage of 700 μV maximum, an offset voltage drift of 1 μV/°C, and typical input bias currents of 0.3 pA provide dc precision with source impedances up to 1 GΩ. The AD823A provides 17 MHz, −3 dB bandwidth, and a 30 V/μs slew rate with a low supply current of only 2.6 mA per amplifier. It also provides low input voltage noise of 14 nV/√Hz and −108 dB SFDR at 20 kHz. The AD823A has low input capacitances (0.6 pF differential and 1.3 pF common mode) and drives more than 500 pF of direct capacitive load as a follower. This lets the amplifier handle a wide range of load conditions.This combination of ac and dc performance, plus the outstanding load drive capability, results in an exceptionally versatile amplifier for applications such as ADC drivers, high speed active filters, and other low voltage, high dynamic range systems.The AD823A is available over the industrial temperature range of −40°C to +85°C and is offered in an 8-lead SOIC package and an 8-lead MSOP package.APPLICATIONS Battery-powered precision instrumentation Photodiode preamps Active filters 12-bit to 16-bit data acquisition systems Medical instrumentation

Precision Amplifiers Dual 28MHz Low-V Low-Noise Precision

Operational Amplifiers - Op Amps Dual 1.2uA Max Single-Supply

20 Gbps Clocked Comparator with RSPECL Output Stage Features: Propagation Delay Clock to Output: 120 ps Overdrive & Slew Rate Dispersion: 10 ps Minimum Pulse Width: 60 ps Resistor Programmable Hysteresis Differential Clock Control Input Bandwidth: 10 GHz Power Dissipation: 150 mW RSCML & RSECL Versions Available 16 Lead 3×3mm SMT Package: 9mm2

2.5kV rms Isolated Error Amplifier Features: Stability in isolated feedback applications 0.5% initial accuracy 1% accuracy over the full temperature range Compatible with Type II or Type III compensation networks Reference voltage: 1.225 V Compatible with DOSA Low power operation: <7 mA total Wide voltage supply range VDD1: 3 V to 20 V VDD2: 3 V to 20 V Bandwidth: 400 kHz Isolation voltage: 2.5 kV rms Safety and regulatory approvals UL recognition: 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 565 V peak Wide temperature range −40°C to +125°C ambient operation 150°C maximum junction temperature Qualified for automotive applications

Dual 55V, EMI Enhanced, Zero Drift, Ultralow Noise,Rail-to-Rail Output Operational Amplifiers Features: Low offset voltage: 5 μV maximum Extremely low offset voltage drift: 22 nV/°C maximum Low voltage noise density:  5.8 nV/√Hz typical  117 nV p-p typical from 0.1 Hz to 10 Hz Low input bias current: 50 pA typical Unity-gain crossover: 3 MHz typical Single-supply operation: input voltage range includes ground and rail-to-rail output Wide range of operating voltages  Single-supply operation: 4.5 V to 55 V  Dual-supply operation: ±2.25 V to ±27.5 V Integrated EMI filters Unity-gain stable Download AD4522-2-KGD Data Sheet. Available As Known Good Die and fully guaranteed to data sheet specifications

Ultrafast SiGe Voltage Comparator (Featuring Reduced Swing NECL Output Drivers) Features: 180 ps propagation delay 25 ps overdrive and slew rate dispersion 8 GHz equivalent input rise time bandwidth 100 ps minimum pulse width 37 ps typical output rise/fall 10 ps deterministic jitter (DJ) 200 fs random jitter (RJ) −2 V to +3 V input range with +5 V/−5 V supplies On-chip terminations at both input pins Resistor-programmable hysteresis Differential latch control Power supply rejection > 70 dB

Rail-to-Rail, Fast, Low Power 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator Features: Fully specified rail-to-rail at VCC = 2.5 V to 5.5 V Input common-mode voltage from −0.2 V to VCC + 0.2 V Low glitch TTL-/CMOS-compatible output stage 40 ns propagation delay Low power 1 mW at 2.5 V Shutdown pin Programmable hysteresis Power supply rejection > 60 dB −40°C to +125°C operation

700 MHz to 4200 MHz Tx DGA Features: Differential input to single-ended output conversion Broad input frequency range: 700 MHz to 4200 MHz Maximum gain: 12.0 dB typical Gain range of 20 dB typical Gain step size: 0.5 dB typical Glitch free, thermometer-based digital step attenuator Fast attack, gain switching with programmable gain step Matched 50 Ω inputs and output

10 MHz, 14.5 nV/Hz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier Features: Power supply rejection ratio (PSRR): 98 dB minimum  Common-mode rejection ratio (CMRR): 95 dB minimum Offset voltage: 120 μV maximum Single-supply operation: 2.7 V to 5.5 V  Dual-supply operation: ±1.35 V to ±2.75 V  Wide bandwidth: 10 MHz  Rail-to-rail input and output  Low noise 2 μV p-p from 0.1 Hz to 10 Hz  14.5 nV/√Hz at 1 kHz  Very low input bias current: 2 pA maximum